C3-100 PoE Bundle – IP-Based Access Control Panel

  • Choice of Readers
    Full range of card readers supported. ZK KR-Series readers are stylish and waterproof. C3 supports any wiegand-output reader, including HID Prox, iClass, and XceedID Multi-Technology.
  • Lowest Total Cost of Ownership
    C3 controller firmware can be upgraded in the field. New controller features can be loaded without any advanced tools, extending and expanding the value of your investment.
  • Door Control and More
    Along with relay contacts for controlling door locks, easily programmable auxilary relays can be used for additional control and interface to lights, alarms, annunciators, intrusion detection panels, or even extra locking devices or gate controllers.
  • Advanced Access Control Built-In
    Anti-Passback, First-Card Opening, Multi-Card Opening, Duress Password Entry, and Auxilary Input/Output Linkages are built into controller firmware.
  • Communication
    C3 controllers installed easily on your network and support both TCP/IP and RS-485 communication. Auto-discovery function make the setting and modification of network parameters direct and easy.
  • Capacity
    10,000 events and transactions. Controller is backed up in real-time in on-board optional SD card. Data is preserved when power failure. Controller continues to operate if network connection is interrupted.
  • Options
    C3 controllers come in three sizes to suit project needs and reduce the cost of unused capacity. 1-door, 2-door, and 4-door models can be mixed and matched in an optimized system architecture.
Categories: ,

Description

C3-100 is one of the most rugged and reliable one door controller on the market, with a multitude of built-in features. In this bundle, the PoE splitter can offer 12V 2A DC for both C3-100 and one 12V DC lock. On the input side, just need connect the splitter to a PoE switch.

Typical Installation

C3-100 PoE Bundle-Installation

Components included in the package

Diode(FR107)

Installation Guide

Screw Driver

Screws and Holders

Screws

*Representative images

How to choose the right device for your requirement?

Though all time attendance devices look almost the same, the features and capacity of devices vary in each model. If you have trouble choosing the device most appropriate for your requirement, read the purchase guide.

Additional information

User Capacity

30000

Event Buffer

100,000 transactions

Communication

RS485, Ethernet

Nominal Voltage of C3-100

12v

Standby Current of C3-100

40mA

Operating Temp

0°C~ 45 °C

Operating Humidity

20%~ 80%

Number of doors controlled

One door

Number of readers Supported

2

Aux. Output

1

Types of readers supported

26-bit Wiegand, others upon request

Number of Inputs

2 (Exit Device and Door Status)

Number of Outputs

2 (One Form C relay for lock and one Form C relay for Aux output)

Weight

3.35kg

Dimensions (Bundle Only)

305.2mm × 298.4mm × 89mm

Dimensions ( Board Only)

160mm × 106mm

Maximum Power

15.4W (IEEE 802.3af);25.5W (IEEE 802.3at)

Input voltage

36-57V

Output voltage:

12V

Network standards

IEEE802.3i 10 BASE-T,IEEE802.3i 100 BASE-TX,IEEE802.3x flow control,IEEE802.3af/ IEEE802.3at

Working Temperature

0°C ~ 45 °C

Interface protection

Meet the IEC61000-4-2 (ESD) ± 15KV (air), ± 8KV (contact) requires,Able to withstand 8/20us 24A (12A) energy

Input

an input RJ45 interface

Output

an output RJ45 connector and a DC output interface

Data transfer rate

10/100/1000Mbps

The maximum transmission distance

100 meters

Reviews

There are no reviews yet.

Be the first to review “C3-100 PoE Bundle – IP-Based Access Control Panel”
Go to Top