HR, Payroll, Attendance Software › Forums › Lenvica HRMS › Ask a Question › Virdi device

Viewing 13 reply threads
  • Author
    Posts
    • Jose Lopez
      Member
      August 13, 2013 at 07:35
      Post count: 5
      #19218

      Hello:

      I'm trying to install Lenvica HRMS with a Virdi device, but i can't connect with the device.
      I configure the ip of the pc on the Virdi device.
      Is there any option in the program where you specify the IP of the device?

      Thank you

      Best regards

    • Rijo Pappachan
      Member
      August 13, 2013 at 10:56
      Post count: 92
      #20030

      Hi Lopez,

      Please do the following steps,

      1. Stop the application which is accessing Virdi device.

      2. Unzip the 3 DLLs to 'Windows\System32\' directory from the below link.
      http://www.lenvica.in/downloads/Virdi.zip

      3. Restart the system

      Hope this will help!

      Please update the status as well.

      Regards,
      Rijo

    • Jose Lopez
      Member
      August 13, 2013 at 11:06
      Post count: 5
      #20031

      Hello:

      I followed the steps, but still can not connect.

      On the computer I have installed only the program Lenvica HRMS, should I install something else?

      Thank you

    • Rijo Pappachan
      Member
      August 14, 2013 at 04:26
      Post count: 92
      #20032

      Hi Lopez,

      No other software installation is required. Hope you have placed the dll files in 'Windows\System32\' and restarted the computer.

      Ensure that the fields 'Terminal Id' and 'Client Id' of the software (Time Registration > Devices) should be filled and it should same as in the device.

      Please let us know the model number of the device.

      Thanks,
      Rijo

    • Jose Lopez
      Member
      August 14, 2013 at 05:35
      Post count: 5
      #20033

      Hi:

      It's a Virdi-4000RF

    • Jose Lopez
      Member
      August 14, 2013 at 05:44
      Post count: 5
      #20034

      Hello:

      I can connect the device.

      Can I download the RFID's from the device?

      Thank you

    • Rijo Pappachan
      Member
      August 14, 2013 at 08:55
      Post count: 92
      #20035

      Hi Lopez,

      No. Lenvica HRMS is not capable to download RFID registrations from virdi devices. You can get the punch details and thereby it is possible to the track  employee's Late in, Early out, Overtime etc through attendance module.

      Let us know if you require any further assistance.

      Thanks,
      Rijo

    • Jose Lopez
      Member
      August 14, 2013 at 09:46
      Post count: 5
      #20036

      Hi:

      then I can't register employees and assign RFID with Lenvica HRMS?

      Thank you

    • Rijo Pappachan
      Member
      August 14, 2013 at 10:35
      Post count: 92
      #20037

      Hi,

      Hope you have registered RFID cards with a number for each employee in the device. You need to fill that number against each employee in 'Employee' module as 'Badge Number'. Location: Employee > Employee > Employment > Badge Number.

      Do a refresh on 'Lenvica HRMS Communicator'. You can find the icon for Communicator in the windows task bar. In case the Communicator is not found in the taskbar, you can start it by opening AttendCommunicator.exe(Location: Lenvica HRMS Installation Folder > Bin > AttendCommunicator)

      Check the communicator history to ensure the device is communicating properly with the software.
      Location: Time Registration > Communicator History

      For punching details, go to Time Registration > Time Registration Reports > Raw Punch

      Hope this helps!

      Regards,
      Rijo

    • Anonymous
      Guest
      November 28, 2013 at 10:28
      Post count: 120
      #20038

      can somebody help me , I couldn't communicate with virdi device 4000 via Lenvica HRMS.

      what's the Client ID???

      Regards,

      Rami Al-Gifry
      Aden-Yemen

    • Rijo Pappachan
      Member
      November 28, 2013 at 13:42
      Post count: 92
      #20039

      Hi Rami Al-Gifry,

      You can get it from device's screen itself. If you are unable to get it from device then try with 1 or 0.

      Please update the status as well.

      Regards,
      Rijo

    • Anonymous
      Guest
      December 2, 2013 at 11:51
      Post count: 120
      #20040

      Dear Sir,

      thank you for your replay .

      still I couldn't communicate with Lenvica HRMS  I did all the configuration please see the below links.

      http://www.freeimagehosting.net/newuploads/nxgfr.png

      http://www.freeimagehosting.net/newuploads/9evz3.png

      http://www.freeimagehosting.net/newuploads/k2cnw.png

      regard,
      Rami Al-Gifry

    • nithin
      Member
      June 13, 2014 at 11:55
      Post count: 22
      #20041

      Tried all the methods mentioned above but still our virdi 4000 machine is not working with Lenvica HRMS. Is there any other ways to make the device compatible with Lenvica HRMS?

      Regards,
      Nithin

    • Rijo Pappachan
      Member
      June 13, 2014 at 12:00
      Post count: 92
      #20042

      Hi Nithin,

      We can make virdi 4000 device compatible(customization)with Lenvica HRMS provided the SDK of device. You can get it from the device vendor.

      Contact sales@lenvica.in to get more details on customization of device integration.

      Regards,
      Rijo

  • Author
    Posts
Viewing 13 reply threads
  • You must be logged in to reply to this topic.